Beturing ======== a Befunge-flavoured Turing machine ---------------------------------- *v1.1, Chris Pressey, June 8 2005* ### Introduction Beturing is a programming language based on a "universal" Turing machine with an unbounded, 2-dimensional "tape". (The Turing machine on which it is based is "universal" in the sense that the machine's state transition diagram is stored on the "tape" along with the data.) ### General Layout This 2-dimensional "tape" is where all the action happens; it is called the *playfield* and is divided into discrete units called *cells*. Each cell may store exactly one of a number of *symbols* drawn from a finite alphabet. There are two "heads" that access the playfield, one of which (the *data head*) reads and alters the data (like in a common Turing machine,) the other of which (the *code head*) reads the state transition diagram. The state transition diagram is made up of *codes*. Each code is a 2x2 block of cells in the following form: ab >/ The code head is considered to be over a code when it is over the upper-left cell of it. The names and meanings of the four parts of the code are as follows: - The upper-left cell of a code contains a symbol to look for, called the *seek symbol*. All symbols are valid seek symbols. - The upper-right cell of the code contains a symbol to replace it with, called the *replacement symbol*. All symbols are valid replacement symbols. - The lower-left cell of the code contains an indication of how to move the data head, called the *data head movement operator*. The set of valid data head movement operators is {`>`, `<`, `^`, `v`, `.`, `*`}. - The lower-right cell of the code contains an indication of what to do with the code head, called the *state transition operator*. The set of valid state transition operators is {`>`, `<`, `^`, `v`, `/`, `@`}. ### Syntax When a Beturing playfield is loaded from source such as a text file, lines are translated to rows in the playfield. The first line is loaded at (0, 0), and subsequent lines are loaded at (0, 1), (0, 2), etc. Lines which begin with a `#` are not loaded into the playfield. Certain lines that begin with `#`, listed below, are directives meaningful to any Beturing interpreter. The rest may have a local interpretation (such as the `#!` convention on Unix systems,) or be ignored. A line which begins with `##` is guaranteed to be ignored. - Lines of the form `# @(x, y)` where *x* and *y* are integers reposition the loading of the text file; subsequent lines will be loaded into the playfield at the given position. - Lines of the form `# C(x, y)` specify the initial position of the code head. The last such line is the one that takes effect. - Lines of the form `# D(x, y)` specify the initial position of the data head. The last such line is the one that takes effect. ### Semantics When a Beturing machine is set in motion, it *interprets* the code under the code head, transitions to a new state by moving the code head, then repeats indefinitely until the machine enters the *halt* state. Here is how each code is interpreted: - If the data head movement operator is the special symbol `*`, the following things happen: - The data head is moved by the positive interpretation of the replacement symbol. (Note that this behaviour is new in version 1.1; no data head movement would occur in the `*` case in v1.0.) - The code head is moved by the positive interpretation (x2) of the state transition operator. - Otherwise, if the symbol under the data head matches the seek symbol, the following things happen: - The replacement symbol is written to the cell under the data head. - The data head is moved by the positive interpretation of the data head movement operator. - The code head is moved by the positive interpretation (x2) of the state transition operator. - Otherwise the symbol under the data head does **not** match the seek symbol, and the following things happen: - The code head is moved by the negative interpretation (x2) of the state transition operator. The positive and negative interpretations of the data head movement and state transition operators are given below: Symbol Positive interpretation Negative interpretation --------- ------------------------- ------------------------- > Move right Move right < Move left Move left ^ Move up Move up v Move down Move down . Don't move Don't move / Move right Move down \ Move left Move down | Move up Move down - Move left Move right ` Move right Move up ' Move left Move up @ Halt Halt Note that "x2" in the rules given above means to advance two cells in the given direction; this is used everywhere for moving the code head because codes are 2x2 cell blocks. ### Discussion The Beturing language was designed (in part) as a test of the wire-crossing problem, in the following manner. Note these things about Beturing: - Unlike Befunge's instruction pointer, the code head does not have "direction" or "delta" state; it has only "position" state. Its next position (and thus the machine's next state) is determined entirely by the state transition operator of the current code. - Also unlike Befunge and its `#` instruction, there is no "leap over" state transition operator. Therefore the next state must always be reachable by a continuous, unbroken path through the playfield. - Lastly, unlike Befunge and its torus, the Beturing playfield is really unbounded in all four directions - there is no wrapping around, making it a true plane. All this added together means that a Beturing machine is incapable of having a state transition diagram that is not a planar graph. A state transition diagram which is a complete 5-vertex graph, for example, is not planar. This **might** mean that it is impossible to construct a true universal Turing machine in Beturing, *if* a universal Turing machine requires a state diagram that is not a planar graph. If this were the case then Beturing would not be Turing-complete, and in fact its level of computational power would probably be difficult to determine. ### Update Version 1.0 of the Beturing language, and an interpreter for it written in Lua 5, was released June 6th 2005. On June 7th, graue's development of the Archway language, and my sketches for a Smallfuck interpreter in Beturing have both strongly suggested that a universal Turing machine's state diagram can indeed be a planar graph. I'd still like to go ahead and implement the Smallfuck interpreter, though, since (even if it's a foregone conclusion) it would be pretty impressive to see in action. On June 8th I added the "data head can move on `*`" semantics for v1.1, in preparation for implementing a Smallfuck interpreter from my sketches. Note that this addition does not constitute an increase in Beturing's computational power, only its expressiveness. It was possible to do the same thing in v1.0, but it required one code per symbol in the alphabet, which was a little excessive. On June 10th I added extra "decision" state transition operators (shown with a grey background in the above table) for extra flexibility; there are some planar graphs that can't be rendered in Beturing with just `/`: see the diagram of the Uhing 5-state Busy Beaver machine, for example. As always, you can use the `-o` flag to the interpreter to enforce the v1.0 semantics where these aren't available, if you're a purist.